Collection Instructions

The Hologic^™ Specimen Collection kit is the only acceptable specimen collection system that can be used to collect specimens for this assay.

Specimen Type: Vaginal Swab
Container/Tube: Hologic^™ Specimen Collection Kit: Rapid fFN^™
Minimum volume: 250 µL
Collection Instructions: Follow directions in collection kit for important detailed collection instructions and restrictions.

1. During a speculum examination, prior to any examination or manipulation of the cervix or the vaginal tract, lightly rotate the sterile swab across the posterior fornix of the vagina for approximately 10 seconds to absorb cervicovaginal secretions. Subsequent attempts to saturate the swab may invalidate the test.

2. Remove swab and immerse tip in buffer. Break the shaft (at the score) even with the top of the tube.

3. Align the shaft with the hole inside the tube cap and push down tightly over the shaft, sealing the tube.

Warning: The shaft must be aligned to avoid leakage.

4. Write the patient’s name and other identifying information required on the specimen transport tube label.

5. Hand deliver the specimen to the laboratory.Transport specimens at 2 to 25°C, or frozen.

6. Specimens not tested within eight (8) hours of collection must be stored refrigerated at 2 to 8°C and assayed within three (3) days of collection, or frozen and assayed within three (3) months to avoid degradation of the analyte. Do not expose to temperatures above 25°C.